Body (Interior and Exterior)
Glove Box Housing Repair procedures
In this manual: Body (Interior and Exterior)
9steps
~54min
3/5difficulty
Done 0 of 9
Replacement
Remove the crash pad side cover [RH] (A) by using a remover.

Remove the crash pad plate [RH] (A) by using a remover.

Disconnect the start/stop button connector (A).

Disconnect the stopper (B) from the glove box (A).

Disconnect the air damper (A) from the glove box.

Disconnect the pins (A) and then remove the glove box (B).

Remove the crash pad under cover [RH] (A).

Remove the glove box housing (A) after loosening the mounting screws and bolts & nuts.

Install in the reverse order of removal.
Was this page helpful?