Body (Interior and Exterior)

Steering Column Shroud Panel Repair procedures

13steps
~78min
3/5difficulty
Done 0 of 13

Replacement

[Steering column shroud upper panel]

  1. Remove the crash pad side cover [LH] (A) by using a remover.

  2. Remove the crash pad lower panel (A) after loosening the screw.

  3. Disconnect the fuel filler door switch connector (A).

  4. Remove the crash pad plate [LH] (A) after loosening the screw.

  5. Disconnect the crash pad plate [LH] connector (A).

  6. Remove the crash pad side cover [RH] (A) by using a remover.

  7. Remove the crash pad garnish [LH] (A) by using a remover.

  8. Disconnect the start/stop button connector (A).

  9. Remove the cluster fascia panel (A) by using a remover.

  10. Install in the reverse order of removal.

[Steering column shroud lower panel]

  1. Remove the steering column upper panel.

  2. Loosen the mounting screws and remove the steering column shroud lower panel (A).

  3. Install in the reverse order of removal.