DCT(Dual Clutch Transmission) System

Input Speed Sensor Repair procedures

2steps
~12min
1/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Removal

  1. Remove the clutch actuator.

    (Refer to Dual Clutch Transmission Control System - "Clutch Actuator Assembly")

  2. Remove the connector from the bracket after disconnecting the connector and then remove the input speed sensor (A).

    Tightening torque : 9.8 - 11,8 N·m

Installation

  1. Install in the reverse order of removal.