Audio system
Phone
In this manual: Audio system
~3min read
✽ NOTICE - Using Bluetooth® (BT) Phone
- Bluetooth® is a near-field wireless networking technology that uses the 2.4 GHz frequency to connect various devices within a certain distance wirelessly.
- The technology is used in PCs, peripherals, Bluetooth® phones, tablet PCs, household appliances and automobiles. Devices supporting Bluetooth® can exchange data at high speeds without physical cable connections.
- Bluetooth® Handsfree devices enable convenient access to phone functions through cell phones equipped with Bluetooth®.
- Some Bluetooth® devices may not be supported by the Bluetooth® Handsfree function.
- When Bluetooth® is connected and calls are attempted through a connected cell phone from outside the vehicle, the call is connected through the Bluetooth® Handsfree function of the vehicle.
- Please be sure to disconnect the Bluetooth® Handsfree function through your Bluetooth® device or the audio screen.
Safety precautions
- The Bluetooth® Handsfree function helps drivers to drive safely. By connecting a Bluetooth®-enabled phone to the vehicle’s audio system, phone calls can be made and received through the audio system and contacts can be managed. Consult the user manual before use.
- Excessive manipulation of controls while driving, making it difficult to pay attention to the road ahead, can lead to accidents. Do not operate the device excessively while driving.
- Looking at the screen for a prolonged time increases the risk of accidents. Keep time spent looking at the screen to a minimum.
Precautions when connecting Bluetooth® devices
- The vehicle supports the following Bluetooth® functions. Some Bluetooth® devices may not support some functions.
1) Bluetooth® Handsfree phone calls
2) Operations during a call (Private, Switch, Mic Vol.(Out Vol.) controls)
3) Download call history saved to the Bluetooth® device
4) Download contacts saved to the Bluetooth® device
5) Automatic contacts/call history download when Bluetooth® is connected
6) Automatic Bluetooth® device connection when the vehicle is started
7) Bluetooth® audio streaming playback - Before connecting the audio system to your device, make sure your device supports Bluetooth®.
- Even if your device supports Bluetooth®, a Bluetooth® connection cannot be established if the device’s Bluetooth® function is switched off. Search and connect with the Bluetooth® function enabled.
- Pair or connect Bluetooth® devices to the audio system with the vehicle at a standstill.
- If a Bluetooth® connection is lost due to abnormal conditions while a Bluetooth® device is connected (communication range exceeded, device power OFF, communication errors, etc.), the disconnected Bluetooth® device is searched for and automatically reconnected.
- If you want to disable the Bluetooth® device auto-connect function, turn the Bluetooth® function OFF on your device. Consult the user manuals for individual devices to see whether Bluetooth® is supported.
- Handsfree call quality and volume may vary depending on the type of Bluetooth® device.
- Some Bluetooth® devices are subject to intermittent Bluetooth® connection failures. In this case, use the following method.
1) Turn the Bluetooth® function off on your Bluetooth® device ➟ Turn it on and try again.
2) Delete the paired device from both the audio system and Bluetooth® device, then pair again.
3) Power down your Bluetooth® device ➟ Turn it on and try again.
4) Completely remove the battery from your Bluetooth® device; reinsert it, reboot, and attempt connection.
5) Restart the vehicle and reattempt connection.
Was this page helpful?