Kia Optima Hybrid Owner's Manual Quiz
Engine Control System/Fuel System

Accelerator Pedal Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
3steps
~18min
2/5difficulty
0102030405013.710N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nuts (B) and bolt (C), then remove the accelerator pedal module.

Installation

  1. Install in the reverse order of removal. Accelerator pedal module bolt: 8.8 ~ 13.7 N·m Accelerator pedal module nut: 9.8 ~ 14.7 N·m

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.