Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Ventilated Seat Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
11steps
~66min
3/5difficulty
Done 0 of 11

Removal

[Front Seat]
  1. Remove the front seat assembly. (Refer to Body group - "Front Seat")
  2. Remove the seatback trim and cushion cover. (Refer to Body group - "Front Seat")
  3. Loosen the screws and remove the retaining hook (B), then remove the ventilation duct (A).
  4. Remove the ventilation panel (A) and the retaining clip (B) from the seat cushion.
  5. Loosen the retaining clips and screws, then remove the climate control fan and duct (A).
  6. Remove the screws securing the ventilation control unit.
  7. Disconnect the connector and remove the air ventilation control unit. [Driver]
    [Passenger]

Installation

[Front Seat]
  1. Install the connectors and the ventilation control unit.
  2. Install the ventilation duct and fan.
  3. Install the seatback trim.
  4. Install the seat assembly and the seat rail cover.

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.