Body Electrical System
Seat Heater Switch Repair Procedures
In this manual: Body Electrical System
11steps
~66min
3/5difficulty
Done 0 of 11
Inspection
Front Seat Heater Switch- Disconnect the negative (-) battery terminal.
- Remove the floor console upper cover. (Refer to Group BD - "Console")
- Disconnect the seat heater switch connectors from the floor console upper cover (A).
- Turn on each seat heater switch and check for continuity between the terminals. If there is no continuity, replace the seat heater switch. [B]
[M/T]
- Disconnect the negative (-) battery terminal.
- Remove the rear door trim panel. (Refer to BD group - "Rear Door")
- Remove the power window switch (A).
- Turn on the rear seat heater and check the circuit continuity between the terminals. If there is no continuity, replace the seat heater switch.
Installation
- Install the seat heater switch.
- Install the power window switch.
- Install the rear door trim panel.
Test yourself
A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?