Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Blind Spot Detection Indicator Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
5steps
~30min
2/5difficulty
Done 0 of 5

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the mirror (C) from the mirror holder after disconnecting the heater connector (A) and the BSD warning connector (B).
  3. Remove the BSD indicator lamp (A).

Installation

  1. Install the BSD indicator lamp and the mirror.
  2. Connect the negative (-) battery terminal.

Inspection

  1. Make sure the mirror operates correctly, as shown in the table below.
    BSD warning lamp

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.