Kia Soul EV Owner's Manual Quiz
Body (Interior and Exterior)

Crash Pad Center Panel Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Maintenance — 17Drive Shaft and Axle — 15Suspension System — 36Steering — 24Restraints — 48Brake System — 37Body (Interior and Exterior) — 207Body Electrical System — 203Heating, Ventilation, and Air Conditioning — 80Electric Vehicle Battery System — 115
5steps
~30min
2/5difficulty
Done 0 of 5

Replacement
  • Wear gloves to protect your hands.
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")
  2. Remove the crash pad lower panel. (Refer to Crash Pad - "Crash Pad Lower Panel")
  3. Remove the glove box housing. (Refer to Crash Pad - "Glove Box Housing")
  4. Loosen the mounting screws, then remove the airbag center lower panel (A) using a screwdriver.
  5. Install in the reverse order of removal.
    • Make sure the connectors are connected correctly.
    • Replace all damaged clips.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.