Front Lower Arm Repair Procedures

Replacement

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the front wheel and tire (A).

3. 3
   Remove the lower arm (A) from the steering knuckle.

   Tightening torque: 58.9 ~ 71 N·m

   

4. 4
   Loosen the bolts (B, C) and remove the front lower arm (A). Tightening torque (B) 117.7 ~ 137 N·m (C) 156.9 ~ 176 N·m (16.0 ~ 18.0 kgf·m, 115.7 ~ 130.2 lb-ft)

   

5. 5
   Installation is the reverse of removal.

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Inspect the front stabilizer bar for deformation.
3. 3
   Check all bolts and nuts.