Suspension System
Power Electric Frame Repair Procedures
In this manual: Suspension System
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
- Remove the motor and reduction drive. (Refer to Traction Motor System - “Motor and Differential Assembly”)
- Remove the Electric Water Pump (EWP). (Refer to Traction Motor System - “Electric Water Pump”)
- Remove the battery mounting bolt (A).
Tightening torque: 6.8 ~ 10.7 N·m
- Disconnect the wiring harness (A) from the power electric frame.
- Remove the nuts securing the left and right support brackets (A, B), then remove the power electric frame (A). Tightening torque 49.0 ~ 64 N·m 78.5 ~ 98 N·m
- Install in the reverse order of removal.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?