Engine Electrical System

DC-DC Converter Repair Procedures

4steps
~24min
2/5difficulty
0102030405064N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Disconnect the negative battery cable.
  2. Remove the glove box housing. (Refer to Body - "Glove Box Housing")
  3. Disconnect the DC/DC converter connector (A).
  4. Remove the DC-DC converter (B) after loosening the nuts. [LHD]
    [Right-hand drive]

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.