Kia Cee'd Quiz
Brake System

Repair Procedures of Front Wheel Speed Sensor

In this manual: Brake System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
5steps
~30min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Remove the front wheel and tire.

    Tightening torque: 88.3 ~ 108 N·m

  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  3. Remove the front wheel guard.
  4. Disconnect the front wheel speed sensor connector (A), then remove the front wheel speed sensor.
  5. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.