Kia Cee'd Quiz
Brake System

Rear Wheel Speed Sensor Repair Procedures

In this manual: Brake System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Removal

  1. Remove the rear wheel and tire.

    Tightening torque: 88.3 ~ 108 N·m

  2. Remove the rear wheel speed sensor mounting bolt (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  3. Remove the bolt securing the rear wheel speed sensor cable.
  4. Remove the rear wheel arch trim. (Refer to Body - "Rear Wheel Arch Trim")
  5. Disconnect the rear wheel speed sensor connector (A), then remove the rear wheel speed sensor.
  6. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.