Kia Optima DL3 Quiz
What to Do in an Emergency

Tire Pressure Check

In this manual: What to Do in an Emergency
Your Vehicle at a Glance — 5Safety Features of Your Vehicle — 46Vehicle Specifications — 139Driving Your Vehicle — 69What to Do in an Emergency — 18Maintenance — 64Specifications and Consumer Information — 13
~1min read

1. After driving approximately 7 to 10 km (4 to 6 miles) or about 10 minutes, stop at a suitable place.

2. Connect the filler hose (3) of the compressor (clamp side) directly, then connect the filler hose (3) (opposite side) to the tire valve.

3. Connect the compressor to the vehicle power outlet using the cable and connectors.

4. Adjust the tire pressure to 200 kPa (29 psi). With the ignition on, proceed as follows.

- To increase the inflation pressure: Turn on the compressor to position I. To check the current inflation pressure setting, turn off the compressor briefly.

WARNING

Do not operate the compressor for more than 10 minutes, otherwise the unit may overheat and be damaged.

- To decrease the inflation pressure: Press the button (9) on the compressor.

CAUTION - Tire Pressure Sensor

When using the Tire Mobility Kit containing sealant not approved by Kia, the tire pressure sensors may be damaged by the sealant. Sealant on the tire pressure sensor and wheel should be removed when replacing the tire with a new one, and the tire pressure sensors should be checked at an authorized dealer.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.