Kia Picanto JA Quiz
Manual Transmission

Control Shaft Assembly

In this manual: Manual Transmission
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
4steps
~24min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

1. Control Shaft Assembly

Repair Procedures

Removal

  1. Shift the transaxle into neutral.
  2. Remove the battery and battery tray. G 1.0 T-GDI KAPPA (Refer to Engine Electrical System - "Battery")
  3. Remove the control cable from the control shaft after removing the pins (A).
  4. Completely remove the drive shaft (A).

    Tightening torque: 19.6–26 N·m

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.