Mazda 2 Quiz
Standard Safety Equipment

Child Restraint Installation Table

In this manual: Standard Safety Equipment
Driving — 65Operation and maintenance — 45IN AN EMERGENCY — 45Interior comfort — 40Technical data — 4Customer Information — 9Getting to know your Mazda — 32Standard Safety Equipment — 24Your Vehicle - At a Glance — 12Fuel Requirements (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Fuel Requirements (SKYACTIV-D 1.5) — 1Emission Control System (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Emission Control System (SKYACTIV-D 1.5) — 1Engine Exhaust Emissions (Carbon Monoxide) — 1Replacing Exterior Light Bulbs — 1Replacing interior bulbs — 1
~3min read

(Europe and countries complying with ECE R16)

The table below provides information on installing child restraints in the various installation positions. For information on installing child restraints from other manufacturers, refer to the instructions provided by the manufacturer of that child restraint.

ISOFIX Child Restraints

When installing a child restraint on a rear seat, refer to the child restraint manufacturer's instructions and the "With ISOFIX Anchor" section on page 2-39.

Foteliki dla dzieci z systemem ISOFIX

(1) For child restraints without an ISO/XX class designation (A to G) for the applicable weight group, the vehicle manufacturer should specify the appropriate ISOFIX child restraints recommended for each installation position.

Description of the letter codes used in the table.

IUF = Position suitable for universal ISOFIX child restraints approved for forward-facing installation in this weight group.

IL = Position suitable for selected ISOFIX child restraints (CRS).

The ISOFIX child restraints listed belong to the "vehicle-specific", "restricted" or "semi-universal" category.

Child restraints offered as genuine Mazda accessories can be installed. For child restraints that can be installed in your vehicle, refer to the accessories catalog.

(Outside Europe) For child restraints that can be installed in your Mazda, consult a specialist service; we recommend an Authorized Mazda Dealer.

X = Position not permitted for ISOFIX child restraints in this weight group and/or class.

i-Size Child Restraints

Vehicles with labelon the
front surface of the rear seatback are designed for installing i-Size child restraints.

Label location

Umiejscowienie etykiety

An i-Size child restraint can be installed on the seat as follows:


Description of the letter codes used in the table.

i-U = Suitable for i-Size "universal" child restraints, facing forward or rearward.

X = Position not suitable for i-Size "universal" child restraints.

CAUTION

  • An i-Size child restraint is a restraint certified in the i-Size category in accordance with UN Regulation No. 129.

  • Vehicles with the label on the front surface
    of the rear seat backrest are equipped for mounting i-Size child seats.

Child seats secured with the seat belts

When installing a child seat, observe the following guidelines:

  • If the child seat does not sit flush against the seatback because of the head restraint, remove the head restraint so the child seat fits properly against the seatback.

See "Headrests" on page 2-12.

  • When installing a child seat in the rear seat, move the front seat forward so that it does not contact the child seat.

    • See the "Seat Adjustment" section on page 2-6.
    Foteliki dla dzieci zabezpieczane pasami bezpieczeństwa

    Description of the letter codes used in the table.

    U = Position suitable for "universal" category child seats approved for use in this weight group. UF = Position suitable for forward-facing "universal" category child seats approved for use in this weight group. X = Position not permitted for children in this age group.

    (Other countries)

    Observe the applicable laws regarding the use of child restraints in vehicles.

    Test yourself

    A quick Mazda 2 quiz: every answer comes with an explanation and a link to the manual page.