Mazda 3 Quiz
Body

B Pillar Upper Trim Removal/Installation

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read

1. Remove the following parts:

a. Adjuster anchor cover.

b. Upper anchor installation bolts on the front seat belt.

c. Front scuff plate.

d. Rear scuff plate.

2. Partially peel back the seaming welt.

3. Remove the B-pillar lower trim..

4. Grasp the lower end of the B-pillar upper trim, pull it in the direction of the arrow shown in the figure, and remove clips A, pin B, and pin C.


5. Remove the B-pillar upper trim in the direction of the arrow shown in the figure.


CAUTION:

  • When removing the B-pillar upper trim, be careful not to damage the tab D.

6. Install in the reverse order of removal.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.