Mazda 3 Quiz
Body

Back Up Light Switch Removal/Installation [A26 M R]

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read
0204060801005238N·mlb·ft
Tightening torque found on this page

1. Disconnect the negative battery cable.

2. Disconnect the back-up light switch connector.

3. Remove the aerodynamic under cover No.2..

4. Remove the back-up light switch with the gasket.


5. Install a new gasket and the back-up light switch to the transaxle case.

    Tightening torque

  • 29—52 N·m {3.0—5.3 kgf·m, 22—38 ft·lbf}

6. Install the aerodynamic under cover No.2..

7. Connect the back-up light switch connector.

8. Connect the negative battery cable.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.