Mazda 3 Quiz
Body

Hazard Warning Switch Inspection

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read

1. Disconnect the negative battery cable..

2. Remove the center panel..

3. Verify that the continuity between the hazard switch terminals is as indicated in the table.


  • If not as indicated in the table, replace the hazard warning switch.

4. Apply battery voltage to hazard switch terminal A, and connect terminal F to ground.

5. Verify that the LED illuminates.

  • If there is any malfunction, replace the hazard warning switch.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.