Mazda 3 Quiz
Body

Front Combination Light Removal/Installation

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read
WARNING:

  • Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the discharge headlight service warnings..

1. Disconnect the negative battery cable..

2. Remove the front bumper..

3. Disconnect the connector.


4. Remove the bolt A.

5. Remove the bolt B.

6. Remove the bolt C.

7. Remove the fastener.

8. Pull the front combination light in the direction of the arrow shown in the figure and remove the pin from the body.


9. Remove the front combination light.

10. Remove the bolts D.


11. Remove the bracket in the direction of the arrow (2) shown in the figure while pressing the bracket tabs in the direction of the arrow (1).


12. Install in the reverse order of removal.

13. Adjust the headlight aiming..

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.