Mazda 3 Quiz
Drivetrain

Neutral Switch Removal/Installation [A26 M R]

In this manual: Drivetrain
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read
0204060801003929N·mlb·ft
Tightening torque found on this page

1. Disconnect the negative battery cable.

2. Disconnect the neutral switch connector.

3. Remove the aerodynamic under cover No.2..

4. Remove the neutral switch with the gasket.


5. Install a new gasket and the neutral switch to the transaxle case.

    Tightening torque

  • 29—39 N·m {3.0—3.9 kgf·m, 22—28 ft·lbf}

6. Install the aerodynamic under cover No.2..

7. Connect the neutral switch connector.

8. Connect the negative battery cable.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.