Automatic Transaxle Fluid (ATF) Replacement [Fw6 A EL]

• Do not perform the servicing while the ATF is hot. Otherwise, it could cause severe burns or serious injury.

1. Remove aerodynamic undercover No.2..

2. Remove the dipstick securing bolt.

3. Remove the dipstick.

4. Remove the drain plug and washer, and drain the ATF.

5. Install a new washer and drain plug.

Tightening torque

• 30—41 N·m {3.1—4.1 kgf·m, 23—30 ft·lbf}

6. Add ATF from the dipstick installation hole.

• The ATF color is blue.

• Only use genuine ATF FZ for the FW6A-EL.

ATF type

• Genuine ATF FZ

Resupply amount (Reference)

• ATF is drained from drain plug: 3.5—4.9 L {3.7—5.1 US qt, 3.1—4.3 Imp qt}

7. Adjust the ATF level..

8. Insert the dipstick and install the securing bolt.

Tightening torque

• 8—11 N·m {82—112 kgf·cm, 71—97 in·lbf}

9. Install aerodynamic undercover No.2..