Mazda 6 Quiz
Body

A-pillar trim removal

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Turn the seaming welt over.

2. Disengage clips A using a fastener remover.


3. Pull the A-pillar trim, then disengage clip B (1).

4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar trim (2).

5. Pull clip B out, then rotate 45°.


6. Remove clip B from the grommet by pulling it toward you.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.