Mazda 6 Quiz
Body

Front door trim removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Disconnect the negative battery cable.

2. Open the cap using a small screwdriver, then remove the screw.


3. Remove the inner handle cover.

4. Remove the inner garnish.

5. Remove the cover, then remove screw A.


6. Remove the lens cover, then remove screw B.

7. Disengage clips A from the front door using a fastener remover.

8. Pull the front door trim upward, then disengage hooks B from the front door.

9. Disconnect the power door mirror switch connector and the power window main switch connector (drivers side) or power window subswitch connector (passengers side).

10. Remove the courtesy light.

11. Remove the front door trim.

12. Remove the switch panel from the front door trim.

13. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.