Mazda 6 Quiz
Body

B-pillar upper trim removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the upper anchor of the front seat belt.

2. Remove the B-pillar lower trim.

3. Turn the seaming welt over.


4. Pull the B-pillar upper trim toward you, then disengage, clip B, and pin C from the body.

5. Disengage hook A from the body, then remove B-pillar upper trim.

6. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.