Mazda 6 Quiz
Body

Liftgate side trim removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the liftgate upper trim.

2. Position the strap hanger as shown in the figure.


3. Pull the liftgate side trim toward you, then disengage clips A, pin B and the strap hanger from the body and pin B, hook C, D from the liftgate lower trim.


4. Remove the liftgate side trim.

5. Remove the hanger strap from the liftgate side trim.

6. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.