Mazda 6 Quiz
Body

Initial setting

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
Note
  • A driver side window will not fully close automatically under following the conditions:
- The battery has been disconnected during vehicle maintenance or for other reasons. - The power window main switch connector, or driver-side power window motor connector has been disconnected.
  • Carry out the following procedure to resume operation:

1. Turn the ignition switch to the ON position.

2. Press the driver side power window main switch and fully open the driver side window.

3. Pull up the driver side power window main switch to manual-up position to fully close the driver side window, and keep holding the switch up at the position for about 2 seconds

to complete initial setting.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.