Mazda 6 Quiz
Body

Power window motor removal/installation

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Disconnect the negative battery cable.

2. Remove the front door trim or rear door trim.


3. Disconnect the power window motor connector.

4. Remove the bolts.

5. Remove the power window motor from the power window regulator drum.

6. Install in the reverse order of removal.

Note
  • When installing the power window motor to the power window regulator drum, the drum housing hook may come off the door unit. If this happens, remove the door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the power window motor to the drum.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.