Mazda 6 Quiz
Body

Power window motor inspection

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
Drivers Side

1. Disconnect the power window motor connector.

2. Apply battery positive voltage to the power window motor terminals E and F and inspect the operation the power window motor operation.

  • If not as specified, replace the power window motor.


3. Apply battery positive voltage

to the power window motor terminal D and connect terminal C to ground.

4. Measure the voltage at terminal B and A while performing Step 3.

  • If not as specified, replace the power window motor.
Voltage
Pulse wave: MAX. 5 V, MIN. 0 V
Except Driver's Side

Apply battery positive voltage to the power window motor terminals and inspect the operation of the power window motor.

  • If not as specified, replace the power window motor.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.