Removing and refitting the rear parking brake shoes

REMOVAL AND REFITTING

• Remove the rear brake discs (see relevant operation).
• Unhook (Fig.28):

• the lower return spring (1),
• the springs (2).

Fig. 28

• Remove the shoes (3).
• Unhook the upper return spring (4).
• Remove the adjuster (5).
• Remove the spreader lever (6) from the shoes.
• To refit, reverse the removal procedure, observing the following points:

• apply a thin layer of grease to the contact and sliding surfaces on the spreader lever, the thread of the pressure piece and the inner cylinder of the adjuster toothed wheel,
• make sure the various springs are correctly positioned.