Cargo Net

Important safety notes

The cargo net is not designed to hold heavy loads. Therefore, always secure the cargo.

Otherwise, occupants could be injured by unsecured objects being thrown forward in the event of hard braking, sudden changes of direction or an accident.

Light objects can be thrown forward in the event of hard braking, sudden changes of direction or an accident.

You or other persons could be injured.

If you are transporting light objects, use the cargo net.

The cargo net is stored in the storage compartment under the load compartment floor.

• Undo the 2 hook-and-loop fasteners and remove the cargo net.
• Unroll and spread out the cargo net.

The joints of the upper and lower guide rods must lock audibly.

The corresponding tie-down eyelets used to tension the cargo net are located in the load compartment.

Attaching and Tensioning the Cargo Net

• Attaching and tensioning: insert guide rod 1 into holder 2.
• Hook hook 4 into the tie-down eyelet and pull the free end of the tie-down strap downward until the cargo net is taut.
• Check the net tension after a short drive and retighten if necessary.
• Releasing and removing: loosen the tie-down strap by lifting loop 3.
• Unhook hook 4 from the tie-down eyelet.
• Unhook guide rod 1 from holder 2.
• Stowing: press the red button on the upper and lower guide rods.
• Fold and roll up the cargo net.
• Close the 2 hook-and-loop fasteners of the cargo net storage.