Transmission & Driveline

Air Breather

~1min read

Exploded View

Transfer assembly Air breather hose A Clip A
Hose connector Clip B Air breather hose B
Clip C Air breather
: Always replace after every disassembly.

Removal and Installation

REMOVAL

Remove air breather hose A from transfer assembly.

Remove clip A .

Remove clip B .

Remove A/T air breather hose. Refer to Removal and Installation.

Release clip C and remove air breather hose assembly from bracket.

Separate each component part.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • For non-reusable parts, refer to Exploded View.

  • Align rib of the air breather with the paint mark on the air breather hose, and install air breather hose so that the paint mark faced backward of the vehicle.

    : vehicle front
  • Install air breather hose A with the paint mark facing leftward.

    : vehicle front
  • Be sure to insert air breather hose to air breather tube until hose end reaches the end of tube.

  • When inserting air breather hose A and air breather hose B to hose connector , be sure to insert it fully until its reaches the stop.