Transmission & Driveline
Input Oil Seal
In this manual: Transmission & Driveline
~1min read
Exploded View

| Transfer assembly | Input oil seal | ||||
| : vehicle front | |||||
| : Always replace after every disassembly. | |||||
| : Apply transfer fluid. | |||||
Removal and Installation
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
INSTALLATION
Note the following, and install in the reverse order of removal.
Install input oil seal with a drift (A) (commercial service tool) within the dimension (L) shown as follows.
L : 1.5 – 2.5 mm (0.059 – 0.098 in) 
Was this page helpful?