Transmission & Driveline
Transfer Cam Position Sensor
In this manual: Transmission & Driveline
~1min read
Exploded View

| Transfer assembly | Transfer cam position sensor | ||||
| : N·m (kg-m, in-lb) |
Removal and Installation
REMOVAL
Ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer cam position sensor connector.
Remove the transfer cam position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
When replacing transfer cam position sensor, performe writing unit parameter. Refer to Description.
Was this page helpful?