Transmission & Driveline

Air Breather

~2min read

Exploded View

Clip A Air breather hose A Hose connector
Clip B Air breather hose B Clip C
Bracket Hose clamp Front final drive assembly
: Always replace after every disassembly.
: N・m (kg-m, in-lb)

Removal and Installation

REMOVAL

Remove engine under cover. Refer to Exploded View.

Release hose clamp , and remove air breather hose B from final drive assembly.

Remove clip C from bracket .

Remove bracket mounting bolt ( ) and remove bracket .

Remove clip B .

Remove clip A .

Remove air breather hose assembly.

Separate each component part.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • For non-reusable parts, refer to Exploded View.

  • When inserting air breather hose to hose connector , be sure to insert it fully until its end reaches the stop.

  • When inserting air breather hose B to final drive assembly, be sure to insert it fully until its end reaches the stop.

  • When installing air breather hose, make sure there are no pinched or restricted areas on air breather hose caused by bending or winding.