Back Door Trim
Exploded View

| Back door panel | Back door upper garnish | Back door side garnish RH | |||
| Back door lower finisher | Back door pull handle | Back door finisher cap*1 | |||
| Automatic back door switch finisher*2 | Back door inner finisher | Back door side garnish LH | |||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
*1: Without automatic back door system models
*2: With automatic back door system models
Back Door Lower Finisher
Removal and Installation
REMOVAL
Remove back door pull handle. Refer to Removal and Installation.
Remove back door finisher cap (without automatic back door system models) or automatic back door switch finisher (with automatic back door system models).
- Back door finisher cap: Refer to Removal and Installation.
- Automatic back door switch finisher: Refer to Removal and Installation.
Apply protective tapes (A) on back door inner finisher to protect it from damage.

Disengage back door lower finisher fixing clips and pawls using a remover tool (A), and then back door lower finisher.

| : Clip | |
| : Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Back Door Inner Finisher
Removal and Installation
REMOVAL
Remove back door lower finisher. Refer to Removal and Installation.
Apply protective tapes (A) on back door panel to protect it from damage.

Insert remover tool (A) close to clip when starting to remove back door inner finisher.
Disengage back door inner finisher fixing clips and pawls according to numerical order 1→15 indicated by arrow as shown in the figure, and then remove back door inner finisher.

| : Clip | |
| : Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Back Door Upper Garnish
Removal and Installation
REMOVAL
Fully open back door.
Apply protective tape (A) on back door panel to protect it from damage.

Disengage back door upper garnish fixing pawls and metal clips using a remover tool (A), and then remove back door upper garnish.

| : Pawl | |
| : Metal clip |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Back Door Side Garnish
Removal and Installation
REMOVAL
Remove back door inner finisher. Refer to Removal and Installation.
Remove back door upper garnish. Refer to Removal and Installation.
Apply protective tape (A) on back door panel to protect it from damage.

Disengage back door side garnish fixing metal clips using a remover tool (A), and then remove back door side garnish.

| : Metal clip |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Back Door Pull Handle
Removal and Installation
REMOVAL
Fully open back door.
Disengage back door pull handle fixing pawls, and then remove back door pull handle.

| : Pawl |
INSTALLATION
Note the following item, and then install in the reverse order of removal.
Back Door Finisher Cap
Removal and Installation
REMOVAL
Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.

Disengage back door finisher cap fixing pawls using a remover tool (A), and then remove back door finisher cap.

| : Pawl |
INSTALLATION
Note the following item, and then install in the reverse order of removal.
Automatic Back Door Switch Finisher
Removal and Installation
REMOVAL
Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.

Disengage automatic back door switch finisher fixing pawls using a remover tool (A).

| : Pawl |
Disconnect harness connectors, and then remove automatic back door switch finisher.
INSTALLATION
Note the following item, and then install in the reverse order of removal.