Body Interior

Front Door Finisher

~3min read

Exploded View

Front door panel Inside seal Front door sash inner cover
Pull handle cap Inside handle cap Front door finisher
Pull handle bracket
: Clip
: Pawl
: N·m (kg-m, in-lb)

Front Door Finisher

Removal and Installation

REMOVAL

Fully open front door.

Remove pull handle cap.Apply protective tape (A) on front door finisher to protect it from damage.

Remove pull handle cap using a remover tool (A).

Remove front door finisher fixing screws .

Remove inside handle cap.Apply protective tape (A) on inside handle to protect it from damage.

Disengage inside handle cap fixing pawls using a remover tool (A), and then remove inside handle cap.
: Pawl

Remove front door finisher mounting bolt .

Apply protective tapes (A) on front door sash inner cover to protect it from damage.

Apply protective tape (A) on front door panel to protect it from damage.

Disengage front door finisher fixing clips using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure.

: Clip

Disconnect each front door harness connector, and then remove harness fixing clips from front door finisher.

Disconnect inside handle cable from inside handle according to numerical order 1→2 indicated by arrows as shown in the figure.

Disconnect lock knob cable from front door finisher according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove front door finisher.

Remove pull handle bracket mounting bolts , and then remove pull handle bracket.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Front Door Sash Inner Cover

Removal and Installation

REMOVAL

Remove front door finisher. Refer to Removal & Installation.

Remove inside seal according to numerical order 1→2 indicated by arrows as shown in the figure.

Apply protective tapes (A) on front door panel to protect it from damage.

Disengage front door sash inner cover fixing clips using a remover tool (A).

: Clip

Remove front door sash inner cover according to numerical order 1→3 indicated by arrows as shown in the figure.

Disconnect tweeter harness connector, and then remove front door sash inner cover.

INSTALLATION

Note the following items, and then install in the reverse order of removal.