Body Interior

Headlining

~5min read

Exploded View

Without Moonroof Models

Roof rear garnish Room lamp bracket Headlining assembly
Third assist grip RH Personal lamp bracket Personal lamp
Second assist grip RH Vanity mirror lamp bracket Front assist grip RH
Vanity mirror lamp Map lamp bracket Sun visor assembly RH
Cover Sun visor assembly LH Second assist grip LH
Third assist grip LH Room lamp Luggage room lamp
Trim fastener Map lamp assembly Sun visor holder
Metal clip Assist grip cap
Dual-lock fastener
: Clip
: Pawl
: Metal clip
, , : Indicates that the part is connected at points with same symbol in actual vehicle.

With Moonroof Models

Roof rear garnish Room lamp bracket Headlining assembly
Third assist grip RH Personal lamp bracket Second assist grip RH
Vanity mirror lamp bracket Front assist grip RH Vanity mirror lamp
Map lamp bracket Sun visor assembly RH Cover (without driving video recorder system)
Cover (with driving video recorder system) Sun visor assembly LH Personal lamp
Second assist grip LH Third assist grip LH Room lamp
Luggage room lamp Map lamp assembly Sun visor holder
Metal clip Assist grip cap
Dual-lock fastener
: Clip
: Pawl
: Metal clip
, : Indicates that the part is connected at points with same symbol in actual vehicle.

Headlining

Removal and Installation

REMOVAL

Remove front pillar garnish (LH and RH). Refer to Removal and Installation.

Remove following parts of front pillar LH (if equipped).Disconnect harness connector .

Remove harness from harness clips .

Remove center pillar upper garnish (LH and RH). Refer to Removal and Installation.

Remove luggage side upper finisher (LH and RH). Refer to Removal and Installation.

Remove harness at the rear of headlining assembly (if equipped).Disconnect harness connector .

Disconnect harness connector .
: vehicle front

Remove map lamp assembly. Refer to Removal and Installation.

Remove cover of front camera. Refer to Removal and Installation.

Disconnect harness connectors of headlining assembly.Disconnect harness connector from inside mirror. Remove harness from harness clip .

Disconnect harness connector from front camera (driving video recorder) (if equipped). Disconnect harness connector of headlining assembly.

Remove all assist grips.Disengage assist grip cap fixing pawl using a remover tool (A), and then remove assist grip cap.

: Pawl
Pull assist grip toward and remove it. Remove fixing metal clips from body panel.

Remove sun visor assembly (LH and RH).Disengage sun visor cover fixing pawls using a remover tool (A), and then remove sun visor cover.

: Pawl
Remove sun visor assembly fixing screws. Disconnect harness connector, and then remove sun visor assembly.

Disengage sun visor holder fixing pawls according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove sun visor holder (LH and RH).

: Pawl

Remove fixing clips at the rear end of headlining assembly.

Detach dual-lock fasteners between headlining assembly and roof panel.

  • Without moonroof models

  • With moonroof models

Remove headlining assembly according to direction indicated by arrow as shown in the figure.

Disengage trim fastener fixing pawls using a remover tool (A), and then remove trim fasteners (with moonroof models).

: Pawl
: vehicle front

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Roof Rear Garnish

Removal and Installation

REMOVAL

Fully open back door.

Release roof rear garnish portion of back door weather-strip. Refer to Removal and Installation.

Release connector tongue of third seat belt retractor from roof rear garnish.

Remove luggage room lamp. Refer to Removal and Installation.

Apply protective tapes (A) on back pillar garnish to protect it from damage.

Disengage roof rear garnish fixing clips and pawls using a remover tool (A), and then remove roof rear garnish.

: Clip
: Pawl

INSTALLATION

Note the following items, and then install in the reverse order of removal.