Floor Trim
Exploded View
For Second Bench Seat
| Rear floor carpet | Carpet hook | Front floor carpet | |||
| Harness clip | Base | Front floor center spacer | |||
| Footrest | Front floor rear spacer | ||||
| : Pawl | |||||
For Second Captain Seat
| Rear floor carpet | Carpet hook | Front floor carpet | |||
| Harness clip | Base | Front floor center spacer | |||
| Footrest | Front floor rear spacer | ||||
| : Pawl | |||||
Front Floor Carpet
Removal and Installation
REMOVAL
Remove seat.Remove front seat assembly (LH and RH). Refer to Removal and Installation. Remove second seat assembly (LH and RH).
Captain seat: Refer to Removal and Installation.
Bench seat: Refer to Removal and Installation.
Remove rear floor carpet. Refer to Removal & Installation.
Remove dash side finisher (LH and RH). Refer to Removal and Installation.
Remove center pillar lower garnish (LH and RH). Refer to Removal and Installation.
Remove console.Remove front center console assembly. Refer to Removal and Installation. Remove front center console brackets. Remove rear center console assembly (if equipped). Refer to Removal and Installation.
Remove steering member stay LH. Refer to Removal and Installation.
Remove rear floor duct 1 (LH and RH). Refer to Removal and Installation.
Disconnect each harness connector, and then remove body harness fixing clips and each control unit to vehicle body center side.
Remove front floor carpet.
Remove carpet hook.Disengage base fixing pawls using a remover tool (A), and then unlock.

| : Pawl |

INSTALLATION
Note the following item, and then install in the reverse order of removal.
Rear Floor Carpet
Removal and Installation
REMOVAL
Remove luggage side lower finisher. Refer to Removal and Installation.
Remove rear floor carpet.
Remove carpet hook.Disengage base fixing pawls using a remover tool (A), and then unlock.

| : Pawl |

INSTALLATION
Note the following item, and then install in the reverse order of removal.