Electrical & Power Control
Configuration (bcm)
In this manual: Electrical & Power Control
2steps
~12min
2/5difficulty
Done 0 of 2
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the BCM.
Refer to Work Procedure.
The configuration no need to “save” configuration data from the BCM. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Ignition switch ON.
Perform writing vehicle specification to BCM following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
WORK END
Was this page helpful?