Electrical & Power Control
Mac Key Writing
In this manual: Electrical & Power Control
3steps
~18min
2/5difficulty
Done 0 of 3
Description
When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.
Ignition switch ON
CONSULT is connected to internet
Work Procedure
PERFORM MAC KEY WRITING
Ignition switch ON.
Select "MAC key writing" on "Work support" of "BCM" using CONSULT.
Touch "Write".
WORK END
Was this page helpful?