Ventilation, Heater & Air Conditioner

Front Heater & Cooling Unit Assembly

~5min read

Exploded View

REMOVAL

Front blower unit assembly Front heater & cooling unit assembly Steering member
Drain hose
: Always replace after every disassembly.
: Indicates that the part is connected at points with same symbol in actual vehicle.

DISASSEMBLY

Heater pipe support Front expansion valve Cooler grommet
Cooler packing Front case lower assembly Sub harness
J nut Spring nut Front heater & cooling unit
Front heater core Front case upper O-ring
Front evaporator Intake sensor
: Clip
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)

Front Heater & Cooling Unit Assembly

Removal and Installation

REMOVAL

Use a refrigerant collecting equipment (for HFO-1234yf) to discharge the refrigerant. Refer to Recycle Refrigerant.

Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.

Disconnect front heater pipe assembly from front heater core. Refer to Removal and Installation.

Disconnect low-pressure pipe from front expansion valve. Refer to Removal and Installation.

Disconnect high-pressure pipe from front expansion valve. Refer to Removal and Installation.

Remove instrument panel assembly and steering member as a set. Refer to Removal and Installation.

Remove instrument panel assembly from steering member. Refer to Removal and Installation.

Remove each duct.

  • Side ventilator duct (RH and 2 LH). Refer to Removal and Installation.

  • Center ventilator duct. Refer to Removal and Installation.

Disconnect harness connectors , , , and .

Remove front heater & cooling unit assembly fixing screw .

Remove front heater & cooling unit mounting bolts and front blower unit mounting bolts .

Remove front heater & cooling unit assembly and front blower unit assembly as a set.

Remove each duct from front heater & cooling unit assembly.

  • Side ventilator duct 1 LH. Refer to Removal and Installation.

  • Front foot duct (RH and LH). Refer to Removal and Installation.

Remove front blower unit assembly from front heater & cooling unit assembly. Refer to Removal and Installation.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Front Evaporator

Removal and Installation

REMOVAL

Remove front heater & cooling unit assembly. Refer to Removal and Installation.

Remove front heater core. Refer to Removal and Installation.

Remove front expansion valve. Refer to Removal and Installation.

Disconnect front mode door motor harness connector .

Remove sub harness from front heater & cooling unit.

Disconnect front air mix door motor (driver side) harness connector .

Remove front heater & cooling unit fixing screws .

Disengage fixing pawls, and then remove front heater & cooling unit from front case assembly.

: Pawl

Remove intake sensor from front evaporator. Refer to Removal and Installation.

Remove front case upper fixing screws .

Disengage fixing pawls, and then remove front case upper from front case lower assembly.

: Pawl

Remove front evaporator from front case lower assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Front Expansion Valve

Removal and Installation

REMOVAL

Remove front heater & cooling unit assembly. Refer to Removal and Installation.

Remove cooler packing.

Remove cooler grommet.

Remove mounting bolts, and then remove front expansion valve.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Front Heater Core

Removal and Installation

REMOVAL

Remove front heater & cooling unit assembly. Refer to Removal and Installation.

Disconnect front air mix door motor (passenger side) harness connector .

Remove sub harness from front case lower assembly.

Remove cooler packing.

Remove fixing screws , and then remove heater pipe support.

Remove front heater core.

INSTALLATION

Note the following item, and then install in the reverse order of removal.