Front Seat Cushion
Disassembly and Assembly
DISASSEMBLY
Remove inside and outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage seatback board fixing retainer
.
With 4way power seat system

With 8way power seat system

Disengage seat cushion trim fixing retainers
.
With 4way power seat system

With 8way power seat system

Disengage seat cushion trim fixing retainers
.

Disengage harness fixing clip of seat cushion, and then disconnect harness connector.
Remove seat cushion trim and pad as a set from seat frame assembly.
Remove hog rings, and then separate seat cushion trim and pad.
Remove the following parts after removing seat cushion trim and pad from seat frame assembly.
Seat cushion blower motor (if equipped). Refer to Removal and Installation.
Seat cushion suspension.
Seat cushion trim bracket.
Remove occupant detection system control unit (passenger seat).Disconnect harness connector from occupant detection system control unit. Remove fixing screws, and then remove occupant detection system control unit.
Remove driver seat control unit (if equipped). Refer to Removal and Installation.
Remove passenger seat control unit (if equipped). Refer to Removal and Installation.
Remove seat cushion harness bracket.Disengage harness fixing clips from seat cushion harness bracket.
Remove fixing screws, and then remove seat cushion harness bracket.ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.