Front Seat Cushion Finisher
Disassembly and Assembly
OUTSIDE SEAT CUSHION FINISHER OUTER
Disassembly
Apply protective tape (A) to prevent damage.

Disengage fixing clip(s) and pawls using a remover tool (A), and then remove outside seat cushion finisher outer.
With 4way power seat system


: Clip 
: Pawl With 8way power seat system

| : Clip | |
| : Pawl |
Disengage harness fixing clips from outside seat cushion finisher outer, and then disconnect harness connectors.
Remove the following parts after removing outside seat cushion finisher outer.
Power seat switch. Refer to Removal and Installation.
Lumbar support switch (if equipped). Refer to Removal and Installation.
Massage switch (if equipped). Refer to Removal and Installation.
Assembly
Assemble in the reverse order of disassembly.
INSIDE SEAT CUSHION FINISHER OUTER (WITH 4WAY POWER SEAT SYSTEM)
Disassembly
Remove seat cushion trim and pad. Refer to Disassembly and Assembly.
Remove seat belt buckle. Refer to Removal and Installation.
Apply protective tape (A) to prevent damage.

Disengage fixing clips and pawls using a remover tool (A), and then remove inside seat cushion finisher outer.

| : Clip | |
| : Pawl |
Assembly
Assemble in the reverse order of disassembly.
INSIDE SEAT CUSHION FINISHER OUTER (WITH 8WAY POWER SEAT SYSTEM)
Disassembly
Remove seat belt buckle. Refer to Removal and Installation.
Apply protective tape (A) to prevent damage.

Disengage fixing clips and pawls using a remover tool (A), and then remove inside seat cushion finisher outer.

| : Clip | |
| : Pawl |
Assembly
Assemble in the reverse order of disassembly.
INSIDE / OUTSIDE SEAT CUSHION FINISHER INNER
Disassembly
Remove seat cushion trim and pad. Refer to Disassembly and Assembly.
Remove inside and outside seat cushion finisher inner.
With 4way power seat system
Disengage fixing clip, and then remove inside and outside seat cushion finisher inner.


: Clip With 8way power seat system

Assembly
Assemble in the reverse order of disassembly.
SLIDING MOTOR COVER
Disassembly
Disengage harness fixing clip of sliding motor cover.
Disengage fixing pawls, and then remove sliding motor cover.
With 4way power seat system


: Pawl : vehicle front With 8way power seat system

| : Pawl | |
| : vehicle front |
Assembly
Assemble in the reverse order of disassembly.
OUTSIDE SLIDE FINISHER
Disassembly
Remove outside seat cushion finisher outer.
Remove sliding motor cover.
Remove outside slide finisher fixing screws.
Disengage fixing clips according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove outside slide finisher.

| : Clip |
Assembly
Assemble in the reverse order of disassembly.
INSIDE SLIDE FINISHER
Disassembly
Remove sliding motor cover.
Disengage harness fixing clip of inside slide finisher, and then disconnect harness connector.
Remove inside slide finisher fixing screws.
Disengage fixing clip according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove inside slide finisher.

| : Clip |
Assembly
Assemble in the reverse order of disassembly.