Disengage fixing clips and pawls according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove seatback board.
: Clip
: Pawl
Disengage seatback trim fixing retainers .
Remove mounting nut(s) , and then disengage seatback trim fixing plate(s).
Without front center air bag module
With front center air bag module
Remove headrest holders by raising it while pinching pawls from the bottom of headrest holders.
Disengage harness fixing clips of seatback, and then disconnect harness connectors.
Remove seatback trim and pad as a set from seat frame assembly.
Without front heater and ventilation system
With front heater and ventilation system
Disengage fixing pawls according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove seatback trim and pad as a set from seat frame assembly.
: Pawl
Remove hog rings, and then separate seatback trim and pad.
Remove front side air bag module mounting nuts .
Remove front side air bag module.
Remove front center air bag module (with front center air bag module).Remove front center air bag module mounting nuts .
Remove front center air bag module.
Remove the following parts after removing seatback trim and pad from seat frame assembly.
Seatback blower motor (if equipped). Refer to Removal and Installation.
Lumbar support unit (with 2way lumbar support system).
Lumbar support unit (with 4way lumbar support system).
Seatback suspension (without lumbar support system).
ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.