Suspension

Front Stabilizer

~1min read

Exploded View

Stabilizer bar Stabilizer bushing Stabilizer clamp
Stabilizer connecting rod Lower link
: N·m (kg-m, ft-lb)

Removal and Installation

REMOVAL

Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.

Remove stabilizer connecting rod mounting nuts from lower link.

Remove stabilizer clamps mounting bolts, and remove stabilizer assembly from vehicle.

Remove stabilizer clamps, stabilizer bushings, and stabilizer connecting rods from stabilizer bar.

Perform inspection after removal. Refer to Inspection.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • Install stabilizer bushing that slit becomes vehicle front side ().

  • To installing the stabilizer connecting rod , use a hexagonal wrench (A) to tighten the mounting nut while preventing rotation.

  • Perform inspection after installation. Refer to Inspection.

  • Perform adjustment after installation. Refer to Adjustment.

Inspection

INSPECTION AFTER REMOVAL

Check stabilizer bar, stabilizer connecting rod, stabilizer bushing and stabilizer clamp for deformation, cracks or damage. Replace it if necessary.

INSPECTION AFTER INSTALLATION

Check wheel alignment. Refer to Inspection.

Adjustment

ADJUSTMENT AFTER INSTALLATION

Adjust neutral position of steering angle sensor. Refer to Work Procedure.