Steering
Steering System Service Data and Specifications
In this manual: Steering
~2min read
Steering Wheel
| Item | Standard |
|---|---|
| Steering wheel axial end play | 0 mm (0 in) |
| Steering wheel play on the outer circumference | 0 – 35 mm (0 – 1.38 in) |
| Steering wheel turning force | 34 N (3.5 kgf, 7.6 lbf) or less |
Steering Angle
| Item | Standard | ||
|---|---|---|---|
| Inner wheel | Minimum | 34°05' (34.09°) | |
| Nominal | 37°05' (37.08°) | ||
| Maximum | 38°05' (38.08°) | ||
| Outer wheel | 33°25' (33.42°) | ||
| Item | Standard | ||
|---|---|---|---|
| Inner wheel | Minimum | 33°55' (33.92°) | |
| Nominal | 36°55' (36.92°) | ||
| Maximum | 37°55' (37.91°) | ||
| Outer wheel | 33°15' (33.25°) | ||
Steering Column
| Item | Standard |
|---|---|
Steering column length* (maximum telescopic) |
600.3 - 604.3 mm (23.63 - 23.79 in) |
| Tilt operating range* | 44 mm (1.73 in) |
| Telescopic operating range* | 60 mm (2.36 in) |
| Rotating torque | 0,2 N·m or less |
*: For measuring position, Refer to Inspection.
Steering Shaft
| Item | Standard |
|---|---|
| Sliding range* | 50 mm (1.97 in) or more |
| Lower joint length* (extended position) | 490 mm (19.29 in) or less |
| Steering shaft runout* | 0.2 mm (0.008 in) or less |
*: For measuring position, Refer to Inspection.
Steering Gear and Linkage
| Item | Standard | |||
|---|---|---|---|---|
![]()
|
||||
| Rack stroke neutral position (C) | 27.5 mm (1.083 in) | |||
| Rack stroke full stroke position (C) | 154 mm (6.06 in) | |||
| Outer socket ball joint | Swing force* (Spring balance measurement) | 14.0 – 40.6 N (1.43 – 4.14 kgf, 3.15 – 9.12 lbf) | ||
| Ball joint rotating torque | 0.3 – 2,9 N·m | |||
| Axial end play | 0.5 mm (0.020 in) or less | |||
| Inner socket ball joint | Swing force* (Spring balance measurement) | 9.2 – 72.0 N (0.94 – 7.3 kgf, 2.07 – 16.18 lbf) | ||
| Axial end play | 0.2 mm (0.008 in) or less | |||
| Inner socket length | 75.4 mm (2.968 in) | |||
*: For measuring position, Refer to Inspection.
Was this page helpful?
