Steering Wheel
Exploded View

| Steering wheel | |||||
| : N·m (kg-m, ft-lb) | |||||
| : Always replace after every disassembly. | |||||
Removal and Installation
REMOVAL
Set vehicle to the straight-ahead position.
Remove driver air bag module. Refer to Removal and Installation.
Lock the steering wheel and remove the steering wheel mounting bolt.
Pull the steering wheel to release the spline.
Remove the mounting bolt and remove the steering wheel from the steering column.
INSTALLATION
Note the following, and install in the reverse order of removal.
Adjust neutral position of steering angle sensor. Refer to Work Procedure.
If equipped with ProPILOT Assist, perform steering torque calibration after replacing or removal and installation the steering wheel. Refer to Work Procedure.
Check the spiral cable neutral position after replacing or rotating spiral cable. Refer to Removal and Installation.
Never reuse steering wheel mounting bolt.