4WD warning lamp
Component Function Check
1.CHECK 4WD WARNING LAMP FUNCTION 1. Turn the ignition switch ON.2. Check that 4WD warning lamp turns on.
Is the inspection result normal? YES >> INSPECTION END
NO >> Proceed to diagnosis procedure. Refer to DLN-80, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK POWER SUPPLY AND GROUND CIRCUITPerform the trouble diagnosis for power supply and ground circuit. Refer to DLN-78, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace the error-detected parts.
2.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is any DTC detected? YES >> Check the DTC. Refer to DLN-33, "DTC Index".
NO >> GO TO 3.
3.CHECK 4WD WARNING LAMP SIGNAL
With CONSULT-III
1. Turn the ignition switch ON.
CAUTION:Never start the engine.
2. Check “WARNING LAMP” of CONSULT-III “DATA MONITOR” for “ALL MODE AWD/4WD”.
Does the item on “DATA MONITOR” indicate “On”? YES >> Perform the trouble diagnosis for combination meter power supply circuit. Refer to MWI-51, "COMBINATION METER : Diagnosis Procedure".
NO >> Replace 4WD control module. Refer to DLN-91, "Removal and Installation".